Payment Options: Money Order, Cashier's Check, Personal Check,
Wireless Thermostat and Receiver Combo
Carrier PROGRAMMABLE WIRELESS THERMOSTAT:
This wireless thermostat consists of two (2) parts, a thermostat and a receiver.
The receiver has the wiring connections to the unit and it can be placed wherever the wires are available; the old thermostat location, in a furnace closet, in an attic or basement, or sometimes even inside a package unit on the roof.
Wireless remote control thermostat Back lit (glow in the dark), large numbers, and shows the heating set point, cooling set point, and room temperature Can be manually operated or programmed for energy savings Up to 4 thermostats can be used with one receiver Transmits up to 500 feet, through walls and floors
The receiver is easy to install and is wired just like a standard 24VAC thermostat. Once the receiver is installed, the thermostat can then go anywhere in the building, and it will transmit radio signals back to the receiver. The transmission range is up to 500 feet, and it works through walls, floors, ceilings, etc.
The temperature sensor is located on the thermostat, so place the thermostat where temperature control is most important to you - your bedroom, the boss's office, a baby's room, etc.
2-Stage Heat & 2-Stage Cool
for use with gas / electric or heat pump systems.
Thermostat is completely wireless, receiver can be mounted at unit or at old thermostat's location.Up to 4 thermostats can be used with one receiver. Transmits up to 500 feet, through walls and floors. Transmits at 418MHz using pulse code modulation - won't interfere with other wireless systems Sender uses two AA batteries 7 Day Programmable with 4 time periods per day, copy command and holiday mode Dual-setpoint with adjustable deadband (1 to 6 degrees) and temperature sensor calibration. Programmable Fan All programming stored in nonvolatile memory. Thermoglow Electro-luminous Display. Display shows heat and cool setpoints, mode, and room temperature simultaneously. 5 minute compressor time guard and adjustable cycle limit, both overrideable for servicing equipment Setpoint adjustment range from 35° to 99° F, sensing range from 32° to 99° F. 64 house codes allow installation of up to 64 systems within transmit range with no interference.Hard-wired (Low voltage) connections between heating/cooling equipment and thermostats have many limitations that can now be overcome with wireless technology. Wireless thermostats add the flexibility to control the temperature in one or more locations of your choosing. They are ideal for equipment retrofits, additions, and for overall improvement in HVAC performance in new home construction. Wireless systems typically consist of the thermostat (sensor) itself and a receiver. Most come with one or more remote controllers. The convenience of installing a system with wiring behind the walls is one the largest benefits of this technology. Another is the flexibility to place the thermostat in any number of locations. A third benefit is the ability to add higher levels of control without much effort. The manufacturers also claim significant savings in energy use due to better control over the system. Depending on the system you are comparing, the complexity of the system and corresponding level of control, claims of energy savings can exceed 20%. The less complicated systems will operate similar to a conventional thermostat system. In either case, there will likely be initial installation cost savings, especially for retrofits.Dimensions: 4.75" H x 3.25" L x 1.25" WMore Information:CLICK HERE